列
A procedure for carrying out the detailed design of braced columns (ie columns that do not contribute to resistance of horizontal actions) is shown in Table 1. This assumes that the column dimensions have previously been determined during conceptual design of by using quick design methods, for example those presented in the publicationEconomic Concrete Frame Elements。
Task |
Further guidance |
|
Publication |
标准 |
确定设计寿命 |
How to Design Concrete Structures to Eurocode 2 - Chapter 2:Getting started |
NA to BS EN 1990 Table NA.2.1 |
评估板上的行动 |
How to Design Concrete Structures to Eurocode 2 - Chapter 2:Getting started |
BS EN 1991(10份)和国家附件 |
Determine which combinations of actions apply |
How to Design Concrete Structures to Eurocode 2 - Chapter 1:欧洲码头简介 |
NA到BS EN 1990表Na.a1.1和Na.a1.2(b) |
评估耐用性要求并确定具体强度 |
How to Design Concrete Structures to Eurocode 2 - Chapter 2:Getting started |
BS 8500: 2006 |
检查适当阻力期的盖子要求 |
How to Design Concrete Structures to Eurocode 2 - Chapter 2:Getting started |
批准的文档B. BS EN 1992-1-2 |
计算最小。覆盖耐用性,火灾和债券要求 |
How to Design Concrete Structures to Eurocode 2 - Chapter 2:Getting started |
BS EN 1992–1-1 Cl 4.4.1 |
Analyse structure to obtain critical moments and axial forces |
How to Design Concrete Structures to Eurocode 2 - Chapter 2:Getting started和第5章:列-表3 |
BS EN 1992–1–1 section 5 |
检查苗条 |
如何设计混凝土结构至Eurocode 2-第5章:列and Figures 2 and 3 |
BS EN 1992-1-1第5.8节 |
Determine design moments and axial forces |
如何设计混凝土结构至Eurocode 2-第5章:列and Figures 2 and 3 |
BS EN 1992-1-1第5.8节 |
Determine area of reinforcement required (e.g. using column charts) |
如何设计混凝土结构至Eurocode 2-第5章:列and Figure and column charts Figures 10a to 10e and 11a to 11f |
BS EN 1992-1-1第6.1节 |
Check spacing of bars |
How to Design Concrete Structures to Eurocode 2 - Chapter 2:Getting started |
BS EN 1992–1–1 section 7.3 |
Worked examples for column construction are available in The Concrete Centre publicationEurocode 2的工作示例。
如何使用Eurocode 2:第二版设计混凝土结构